Field installation connector also be called Fast install connector is a new kind of connector that could be used in FTTH project scene.Our Field Assembly Connector products have been factory-polished, eliminating the need for any polishing materials, thereby enabling the preparation and termination of optical fibers in a fraction of the time of other conventional methods. The connector also uses V-groove mechanical splice principals and therefore the use of an epoxy is not required for the termination of the connector.
Feature:
? No epoxy and polishing required
? Quick and easy fiber termination
? Precision mechanical alignment insures low insertion loss
? Superior optical performance
? Streamlined component design, convenient operation
? Pre-installed, on-site assembly without end face grinding and consideration
? Uses proven, molded v-groove technologies
Application in FTTX:
? Fiber optic communication system and telecommunication networks
? Fiber optic data transmission
? CATV
? Optical access network
? Fiber to the Subscriber (FTTX) applications
? Optical cable interconnection
? Maintenance or emergency restoration of fiber networks
? Repair and replacement requirements
? Fiber optic equipment
Specifications
Connector Type | SC | Polishing | UPC |
Ferrule | Ceramic | Fiber Mode | 9/125μm Single mode |
Cable Diameters | 0.9/2.0/3.0mm Simplexcable 2x3FTTHDropCable | Dimension | 50/53/60mm |
Insertion Loss | ≤0.3dB(typical) ≤0.5dB(Max) | Return Loss | UPC≥45dB |
Tension Strength | ≥50N | Operating Temperature | -40°C~+75°C |
Installation introduction
Assembly of the connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. They don’t need to polishing, no epoxy, No electrical power supply, no fused the fiber. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.
