Field Fast installation connector also be called Field fast installation connector or FIC. It is a new kind of connector that could be used in FTTH project scene.
Feature:
? No epoxy and polishing required
? Quick and easy fiber termination
? Precision mechanical alignment insures low insertion loss
? Superior optical performance
? Streamlined component design, convenient operation
? Pre-installed, on-site assembly without end face grinding and consideration
? Uses proven, molded v-groove technologies
Application in FTTX:
? Fiber optic communication system and telecommunication networks
? Fiber optic data transmission
? CATV
? Optical access network
? Fiber to the Subscriber (FTTX) applications
? Optical cable interconnection
? Maintenance or emergency restoration of fiber networks
? Repair and replacement requirements
? Fiber optic equipment
Connector Type | SC | Polishing | UPC and APC |
Ferrule | Ceramic | V-Groove | Plastic Material |
Cable Diameters | 2x3mm FTTH Drop Cable 1.6x2.0mm FTTH Drop Cable | Length | 51mm |
Insertion Loss | ≤0.3dB(typical);≤0.5dB(Max) | Return Loss | UPC≥40dB;APC≥50dB |
Tension Strength | ≥30N | Operating Temp | -40°C~+75°C |
3D Interferometer (Only available if customer requested)
Type | Radius（mm） | Apex offset(μm) | Fiber (nm) |
PC（Ф2.5 ㎜） | 10～25 | ≤70 | -100~+100 |
APC（Ф2.5 ㎜） | 5～15 | ≤70 | -100~+100 |
Working principle
Installation introduction
Assembly of the connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleav- er. They don’t need to polishing, no epoxy, No electrical power supply, no fused the fiber. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.
Related Tools:
1,FTTH Drop cable stripper, To strip the Bow type 2x3mm Drop cable
2,0.9mm/2.0mm/3.0mm Fiber Cable Stripper. To Strip those round cable and bare fiber of 2x3mm Drop cable
3,Fiber cleaver to cut the fiber of Cable&Fiber
4,Use the Length guard board cut the fiber in requested length,. 5，Alcohol， For Fiber Clean after cut
6,Cleanroom Wipes, for Fiber Clean after Alcohol Cleaned
